PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : AI Servo mit 300 D



Bernhard Mon
24.02.2004, 22:45
ne patente Methode zur permanenten Nutzung des AI Servo-Modus, die aus dem DSLR-Forum stammt, hat sich in der Praxis prima bewährt:

http://www.dslr-portal.de/forum/viewtopic.php?t=3280&highlight=mono
Zitat Anfang
Beitrag von tomyeah im DSLR-Forum
hey guys saw this posted on forums at DPreview.com but i dont think i've seen it here.
'previously if you wanted AI Servo without being limited to Sports mode (locked ISO, shutter, aperture, everything) you had to trip the AI Focus somehow to switch by focus far then focus close techniques (or other various whatever) but in that case You had to redo it every shot which gets annoying. they posted a workaround this so it stays in AI Servo mode.

1. buy a 2.5mm mono jack (radio shack or so, should be cheap)
2. put the camera in Burst mode (otherwise it returns to One Shot after each shot)
3. trip the AI Focus to go into AI Servo somehow for this one time
4. while half-pressed still, plug in the 2.5mm jack
5. wala u can let go and it will be on AI Servo for as long as the jack is there

basically it simulates the shutter release being half-pressed for you so it stays in AI Servo. shoot action stuff in ISO100 woot. you can stop thinking about the 10D for now...'

hab das vor 2 monaten da gelesen oder so und es hat gut geklappt. einfach nen 2,5mm MONO klinkenstecker besorgen und schon sind alle probs vergessen.
ich brauch ungefaehr 3-5 sekunden um den stecker reinzufummeln und die cam in den servo zu kicken (meistens mit der hand vorm objektiv vor und zurueckgehen).
die ganze sache mit dem AI servo ist ja nur sinnvoll wenn das zielobjekt nicht gerade auf einen zulaeuft oder von einem weglaeuft, denn in diesen situationen schaltet die cam automatisch in den AI servo.
kleiner zusatz: das schluckt natuerlich batterien, aber son paar 1350mah batterien fuer 5-8 euros kann sich denke ich jeder leisten.
Zitat Ende

funktioniert zuverlässig.
Gruß Bernhard

JSFotografie
24.02.2004, 23:12
wo fummel ich den stecker rein?!

Bernhard Mon
24.02.2004, 23:34

Robert
24.02.2004, 23:46

Bernhard Mon
25.02.2004, 00:57

nordkapp
25.02.2004, 15:23
Wenn ich auf ein Motiv scharfstelle und anschließend die Gestaltung verändere, kommt es sehr häufig zu einer Verstellung des AFs. Ich muß die Kamera schon sehr langsam bewegen, damit sie nicht 'denkt' es würde sich etwas bewegen.

Carsten Bürgel
25.02.2004, 16:09