PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Err 01 bei 28-135 USM IS



Thorsten
31.08.2002, 15:52
Nachdem ich als Neuling in diesem Forum schon viel von euch allen lernen konnte, muss ich mich heute mit einem Problem an
euch wenden.
Ich bekomme meistens nach dem zweiten Foto die Fehlermeldung "Err 01". Nach Aus- und Einschalten der D60 geht das gleich Spiel von vorne los. Das ganze ist unabhängig von IS und MF/AF. Kontakte sind gereinigt. Alles ohne Erfolg.
Andere Objektive funktionieren ohne Probleme. Hat noch jemand eine Idee von euch ??.
Ich wollte das Teil in 14 Tagen mit in den Urlaub nehmen.

thkraft
31.08.2002, 16:03
Diesen Fehler kenne ich nicht (habe dieses Objektiv). Um den Fehler einzugrenzen, müsstest Du Dein Objektiv an einer anderen D60 und ein anderes solches Obj. an Deiner Kamera testen.
Thomas

Thorsten
31.08.2002, 16:18
thkraft schrieb:

>Diesen Fehler kenne ich nicht (habe dieses Objektiv). Um den Fehler einzugrenzen, müsstest Du Dein Objektiv an einer anderen D60 und ein anderes solches Obj. an Deiner Kamera testen.
>Thomas

Hallo Thomas, ich werde wohl mal bei meinem Händler vorbeischauen müssen. Ist zwar noch Garantie drauf, aber wenn das Teil eingeschickt werden muss ist es bestimmt nicht in 14 Tagen wieder da. Nun ja, Morphy´s Gesetz.

Gruss
Thorsten

Walter
31.08.2002, 20:31
Hallo Thorsten!

Thorsten schrieb:
>Nachdem ich als Neuling in diesem Forum schon viel von euch allen lernen konnte, muss ich mich heute mit einem Problem an
>euch wenden.
>Ich bekomme meistens nach dem zweiten Foto die Fehlermeldung "Err 01". Nach Aus- und Einschalten der D60 geht das gleich Spiel von vorne los. Das ganze ist unabhängig von IS und MF/AF. Kontakte sind gereinigt. Alles ohne Erfolg.
>Andere Objektive funktionieren ohne Probleme. Hat noch jemand eine Idee von euch ??.
>Ich wollte das Teil in 14 Tagen mit in den Urlaub nehmen.

Durch Zufall, habe ich im Powershot-Forum Fehlercodes der D30 entdeckt, und dabei mußte ich feststellen, dass auch Fehlercodes der D60 aufgelistet sind.

Auszug aus http://www.rssnet.org/d30.html:

Section 6 - D60-Specific Information
6.1. What do all the error codes mean?
NOTE: Unlike the D30, the D60 has only five error codes.

Err 01: LENS COMMUNICATION
DESCRIPTION: This error occurs in the following conditions:
When electronic communication with the lens cannot be established, after the EOS D60 is powered ON or when the shutter button is pressed halfway.
When the lens diaphragm cannot be controlled during shutter release.
REMEDIAL MEASURE: Clean the electronic contacts on the lens with a clean, soft, dry cloth and check the mount interface switch on the body's lens mount for dirt or other damage. If this does not solve the problem, try another Canon EF lens or have the EOS D30 examined by a qualified service technician. This error is similar to Error 84 on the D30.

Err 02: CF DRIVER
DESCRIPTION: This error occurs when image data cannot be written to the CF card. This error can occur when the CF card is not fully seated in the camera or if the D60 does not detect a card-ready signal within a specified time limit or when the CF card is not usable because it has been corrupted or physically damaged. It can also occur when the camera's battery level is insufficient to completely write the file to the CF card.
REMEDIAL MEASURE: Use the DC Coupler or recharge the battery first. If the error continues to occur with sufficient power available to the camera, check that the CF card is properly inserted. If that's not the problem, then try replacing the CF card. If that does not solve the problem, have the EOS D60 and one of the CF cards that is causing the problem examined by a qualified service technician. This error is similar to Error 22 on the D30.

Err 04: NO SPACE LEFT ON CF CARD
DESCRIPTION: This error occurs when the CF card's free space is insufficient for the image file that has been created. For example, when using a nearly full CF card, if a long exposure is made with noise reduction shut off, the file size may become larger than average, resulting in insufficient space to write the file.
REMEDIAL MEASURE: Use a CF card with sufficient free space. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. This error is similar to Error 23 on the D30.

Err 05: POP UP
DESCRIPTION: This error occurs when the built-in flash pop-up operation cannot be detected even after the pop-up operations have been repeated three times.
REMEDIAL MEASURE: Try clearing the error by turning the main power switch OFF and then back ON. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. (NOTE: The EOS D60 can be used with an EX-series Speedlite and/or with an electronic flash connected through the PC socket even when the built-in flash is unavailable.) This error is similar to Error 83 on the D30.

Err 99: SYSTEM
DESCRIPTION: This error occurs if there is an internal malfunction detected during the camera's self-checking procedure that's executed before every attempted exposure. This is somewhat similar to the flashing 'BC' warning that occasionally appears on EOS-1 series 35mm SLRs.
REMEDIAL MEASURE: Try releasing the error by turning the main power switch OFF and then back ON. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. Please be careful to note the conditions under which the error message occurred. This error is similar to Error 09 or Error 10 on the D30.

Ciao
Walter

Thorsten
01.09.2002, 12:33
Walter schrieb:

>Hallo Thorsten!
>
>Thorsten schrieb:
>>Nachdem ich als Neuling in diesem Forum schon viel von euch allen lernen konnte, muss ich mich heute mit einem Problem an
>>euch wenden.
>>Ich bekomme meistens nach dem zweiten Foto die Fehlermeldung "Err 01". Nach Aus- und Einschalten der D60 geht das gleich Spiel von vorne los. Das ganze ist unabhängig von IS und MF/AF. Kontakte sind gereinigt. Alles ohne Erfolg.
>>Andere Objektive funktionieren ohne Probleme. Hat noch jemand eine Idee von euch ??.
>>Ich wollte das Teil in 14 Tagen mit in den Urlaub nehmen.
>
>Durch Zufall, habe ich im Powershot-Forum Fehlercodes der D30 entdeckt, und dabei mußte ich feststellen, dass auch Fehlercodes der D60 aufgelistet sind.
>
>Auszug aus http://www.rssnet.org/d30.html:
>
>Section 6 - D60-Specific Information
>6.1. What do all the error codes mean?
>NOTE: Unlike the D30, the D60 has only five error codes.
>
>Err 01: LENS COMMUNICATION
>DESCRIPTION: This error occurs in the following conditions:
>When electronic communication with the lens cannot be established, after the EOS D60 is powered ON or when the shutter button is pressed halfway.
>When the lens diaphragm cannot be controlled during shutter release.
>REMEDIAL MEASURE: Clean the electronic contacts on the lens with a clean, soft, dry cloth and check the mount interface switch on the body's lens mount for dirt or other damage. If this does not solve the problem, try another Canon EF lens or have the EOS D30 examined by a qualified service technician. This error is similar to Error 84 on the D30.
>
>Err 02: CF DRIVER
>DESCRIPTION: This error occurs when image data cannot be written to the CF card. This error can occur when the CF card is not fully seated in the camera or if the D60 does not detect a card-ready signal within a specified time limit or when the CF card is not usable because it has been corrupted or physically damaged. It can also occur when the camera's battery level is insufficient to completely write the file to the CF card.
>REMEDIAL MEASURE: Use the DC Coupler or recharge the battery first. If the error continues to occur with sufficient power available to the camera, check that the CF card is properly inserted. If that's not the problem, then try replacing the CF card. If that does not solve the problem, have the EOS D60 and one of the CF cards that is causing the problem examined by a qualified service technician. This error is similar to Error 22 on the D30.
>
>Err 04: NO SPACE LEFT ON CF CARD
>DESCRIPTION: This error occurs when the CF card's free space is insufficient for the image file that has been created. For example, when using a nearly full CF card, if a long exposure is made with noise reduction shut off, the file size may become larger than average, resulting in insufficient space to write the file.
>REMEDIAL MEASURE: Use a CF card with sufficient free space. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. This error is similar to Error 23 on the D30.
>
>Err 05: POP UP
>DESCRIPTION: This error occurs when the built-in flash pop-up operation cannot be detected even after the pop-up operations have been repeated three times.
>REMEDIAL MEASURE: Try clearing the error by turning the main power switch OFF and then back ON. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. (NOTE: The EOS D60 can be used with an EX-series Speedlite and/or with an electronic flash connected through the PC socket even when the built-in flash is unavailable.) This error is similar to Error 83 on the D30.
>
>Err 99: SYSTEM
>DESCRIPTION: This error occurs if there is an internal malfunction detected during the camera's self-checking procedure that's executed before every attempted exposure. This is somewhat similar to the flashing 'BC' warning that occasionally appears on EOS-1 series 35mm SLRs.
>REMEDIAL MEASURE: Try releasing the error by turning the main power switch OFF and then back ON. If this does not solve the problem, have the EOS D60 examined by a qualified service technician. Please be careful to note the conditions under which the error message occurred. This error is similar to Error 09 or Error 10 on the D30.
>
>Ciao
>Walter

Hallo Walter,

Danke für die Info !. Das Handbuch der D60 beschreibt ähnliches zu diesem Fehler und die oben genannten Problemlösungen sind alle von mir durchgeführt worden.
Das Objektiv ist 6 Monate alt und sehr pfleglich von mir behandelt worden, funktionierte vorher an einer D30 tadellos.
Ich meine in dpreview.com mal einen Thread gelesen zu haben,
wo das gleiche Problem mit diesem Objektiv an einer D60 aufgetreten ist, gelesen zu haben. Was mich etwas verwundert ist, das die ersten 2-3 Aufnahmen funktionieren und danach der Fehler auftritt. Es ist nach dem Auslösen eine zeitliche Verzögerung bzw Abkippen des Bildes im Sucher sichtbar.
Als ob die Stromversorgung zusammenbrechen würde.
Ich werde morgen mal zu meinem Händler fahren, vielleicht lässt sich das ganze eingrenzen. Mein 75-300 USM IS funktioniert tadellso an der D60. Ich werde euch jedenfalls auf dem laufenden halten wie die Geschichte nun ausgegangen ist.

Gruss
Thorsten

Thorsten
02.09.2002, 18:12
Heute morgen war ich bei meinem Händler und habe Ihm die Sache kurz geschildert. Neues 28-135 angeschlossen, Fehler war weg. Also, lag definitv am Objektiv. Und das schöne an der Sache ist, das mein Händler sehr Kulant ist und ich das neue gleich an der Kamera dranlassen durfte.

Gruss Thorsten